Volvo Wallbox - Page 14

3. SelecttheWallboxfromthelistofavailableWiFi
devicesusingtheWiFicode(SSID)fromtheaccess
dataletter.
4. EstablishaconnectionwiththeselectedWallbox.
Ifaconnectioncouldnotbeestablished,see
Assemblyandinstallationinstructions,section
Commissioning: No connection to web app estab-
lished via WiFi.
5. EntertheWiFipasswordfortheWallbox(network
key)fromtheaccessdataletter.
6. Whentheconnectionhasbeenestablishedsuc-
cessfully,openthewebbrowser.
7. EnterthehostnameoftheWallboxfromthe
accessdataletterintheaddressbar.Thelogin
areaisdisplayedinthewebappwithalogin
option.
Note
Whenaccessingthewebapp,thewebbrowser
maydisplayawarningstatingthatthepage
posesasecurityriskorthatasecureconnection
cannotbeestablished(dependingonthe
browser).Dependingonthewebbrowser,the
"Advanced"buttoncanbeusedtoenableaccess
tothewebappviaanadditionalbuttonorlink.
8. Selectstandarduserastheuserrole.
Note
Systemsettingscanonlybemadeasthe
Serviceuser,seeoperatinginstructions.
9. Enterthepasswordforthestandarduser(from
accessdataletter).
Afterasuccessfullogin,theOverviewisdis-
played.
Therearenowtwoquickstartoptionsforchargingthe
vehicle:
l
Accessprotectionremainsdisabled,vehicleis
chargedwithoutauthentication,seeCharging a
vehicle without authentication (Free-Charging).
l
EnableaccessprotectionandregistertheRFID
chip,seeRegistering the RFID chip.
12