Volvo Wallbox - Free-Charging: Vehicle Charging Without Authentication; Free-Charging Prerequisites; Connecting Wallbox via Web App

About this document
Toperformallthestepsdescribedhere,theWallbox
mustbefullyconfiguredandreadyforoperation.For
informationonthis,seetheAssemblyandinstallation
instructions.Forfurtherinformation,seeAdditional
information.
Charging a vehicle without authen-
tication (Free-Charging)
Noapprovalisrequired.Connectthechargingcable
andcharge:Thisisthedefaultfactorysetting.
Prerequisites
l
ChargelevelLED(2)islitinwhite.
l
Operating/errorstatusLed(1)islitinwhite.
n
IftheLEDsarenotlit,brieflypressthebutton
(1).
1. Onlyforversionwithsocket:
PlugthechargingcableintothesocketontheWall-
box.
2. Plugthechargingcableintothevehicleconnection.
l
ThechargelevelLED(2)initiallypulseswhite
whilevehicleidentificationisinprogress.
l
WhenthechargelevelLED(2)ispulsing
green,thechargingprocesshasbeenstarted
successfully.
l
Whenchargingiscompleteorthevehicleis
fullycharged,thechargelevelLED(2)iscon-
tinuouslylitingreen.
3. Ifanerroroccurs,fixtheerrorasdescribedinthe
operatinginstructions.
Display Error
type
ChargelevelLED(2)islitinred. Charging
error
Operating/errorstatusLED(1)islit
inblue,yelloworred.
General
error
Connecting to the Wallbox using the
web app
Followthestepsbelowtousethewebapp:
1. Keeptheaccesslettertohand.
2. FindthelistofavailableWiFidevicesonthelaptop,
tabletorsmartphone.
11