*24203424*
24203424
Devices covered by these instructions:
HH 98/9947 Concealed Vertical Rod Exit Device
HH CD98/9947 (Cylinder Dogging) Concealed Vertical Rod Exit Device
HH EL98/9948 (Electric Latch Retraction) Concealed Vertical Rod Exit Device
Special tools needed:
5/64” hex wrench
#10-24 tap
Drill bits: #25, 1/8”, 1/4”,
5/16”, 13/32”
Index:
Screw chart ............................. 2
Door preparation chart............ 3
Device installation ................ 4-5
Optional equipment ............. 7-8
Cut device .............................. 8
Please give these instructions to building owner after device is installed
Frame preparation .................. 5
Adjust rods .............................. 6
Concealed Vertical Rod Exit Device for Metal Door Applications
HH (KAW) 98/9947
Installation Instructions
Need help?
General
To Next Page