To Next PageTo Next Page
Need help?Do you have a question about the Von Duprin PS914 and is the answer not in the manual?
General| Brand | Von Duprin |
|---|---|
| Model | PS914 |
| Category | Power Supply |
| Language | English |
Covers input/output voltage, enclosure, operating temp, and compliance.
Lists optional boards compatible with the PS914 power supply.
Details input/output, power, temp, and compliance for the 900-2RS board.
Outlines installation requirements and securing the power supply enclosure.
Guides on connecting AC power, selecting DC output, and verifying operation.
Instructions for installing the 900-BB board into the PS914.
Steps for physically installing the 900-2RS board into the power supply.
Explains wiring for Individual and Sequential modes, including wire gauge tables.
Details input/output, power, temperature, and compliance for the 900-4RL board.
Instructions for mounting and connecting the 900-4RL board to compatible power supplies.
Configuring the board's operation mode (4TD, AO, SI) using DIP switches.
How to configure outputs for dry contact operation instead of powered outputs.
Using SW1 DIP switches to set time delays for locking devices in 4TD mode.
Explains the purpose of each input and output terminal for the 4TD function.
Illustrates wiring for fail-secure locking devices with the 4TD function.
Illustrates wiring for fail-safe locking devices with the 4TD function.
Configuring auto operator signaling timing and modes using DIP switches.
Defines terminals for access control and auto operator signals.
Wiring diagram for AO function controlling two separate doors.
Wiring diagram for AO function controlling two doors simultaneously.
Setting up Security Interlock (SI) modes and global interlocks.
Defines terminals for access control, lock monitors, and outputs for SI function.
Shows wiring for 2 to 6 door interlocks using the SI function.
Provides guidance for common issues with the 900-4RL board's LED, inputs, and outputs.
Details input/output, power, temperature, and compliance for the 900-FA board.
Instructions for mounting the 900-FA board onto compatible power supply or option boards.
Explains terminal functions and provides wiring diagrams for various reset modes.
Details battery life, type, and replacement part number for the 900-BB.
Steps for physically mounting the 900-BB board onto the PS914 main board.
Instructions for attaching battery wires and placing batteries in the enclosure.
Guidance on checking the BB LED to confirm proper battery connection and charging.
