Need help?Do you have a question about the Vonaq RapidTrace 1200 and is the answer not in the manual?
General| Technology | Ion Mobility Spectrometry (IMS) |
|---|---|
| Communication Interface | Ethernet, USB |
| Sampling Method | Vapor and Particle |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
Important safety precautions and warnings for instrument operation.
Explanation of electrical symbols used on the instrument and in the manual.
Lists international standards the RapidTrace 1200 complies with.
Details the physical features and controls of the RapidTrace 1200 unit.
Provides detailed technical specifications of the RapidTrace 1200.
Explains the measurement accuracy of the RapidTrace 1200.
Steps to prepare the tester for initial operation and view startup screen.
Describes the different menu levels and screen layouts of the tester.
Instructions for setting the unit of measure (feet or meters) in the tester.
Guide to adjusting the display contrast on the RapidTrace 1200.
Configuration for the automatic shutdown feature to save battery life.
Instructions for setting the internal clock and date on the tester.
How to set the velocity of propagation for accurate measurements.
Instructions for selecting the correct cable impedance setting.
Information on the LCD display backlight and how to operate it.
Steps for connecting and performing a cable test, including interpreting results.
How to choose different range scales for cable testing.
Explains the two scanning modes and how to select them.
Instructions for using the device as a tone generator to trace cables.
Diagrams illustrating common fault traces for diagnosis.
Method for determining Vp settings for unknown cable types.
How to adjust the gain control for optimizing signal display.
Procedure for saving measurement traces on the device.
Steps to retrieve previously saved traces from memory.
How to compare current traces with saved traces.
Instructions for deleting saved traces from the device's memory.
Reference for using software to download/upload traces from/to the device.
Detailed steps for replacing the batteries in the instrument.
Guidelines for safely cleaning the RapidTrace 1200 unit.
Recommendations for storing the instrument, especially for extended periods.
Contact information for Vonaq Ltd for support and inquiries.
To Next Page