VonHaus 3500228 - User Manual

A5P | 01
3500228
Please read all instructions carefully before use and
retain for future reference.
CAUTION Do not immerse in water.
Protect your eyes.
Protect your ears.
Protect your hands.
Wear a dust mask.
EN
Please read all instructions carefully before use and retain
for future reference.
INTENDED USE Only operate the power tool/machine
for its intended purpose and within the parameters
specied in this manual.
This power tool/machine is for domestic use only. This
power tool/machine is not intended for use by
persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
supervised or given appropriate instruction concerning
the product’s use by a person responsible for their safety.
GENERAL PRECAUTION Do not allow to be used as a
toy. Children should be supervised to ensure they do not
play with the power tool/machine.
If the power tool/machine is not functioning properly,
has been dropped, damaged, left outdoors, or immersed
in liquid, do not use, contact DOMU Brands Customer
Services.
Do not use the power tool/machine if any parts appear to
be faulty, missing or damaged.
Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY Avoid body contact with
earthed or grounded surfaces such as pipes,radiators,
ranges and refrigerators. There is an increased risk of
electric shock if your
body is earthed or grounded.
Prevent unintentional starting. Ensure the switch is in the
o position before connecting to the power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your nger on the switch, or energising
power tools that are switched on, invites accidents.
Do not operate power tools in explosive atmospheres
such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
Always wear eye protection. Any power tool can throw
foreign objects into your eyes and cause permanent
eye damage. Always wear safety goggles (not glasses)
that comply with ANSI safety standard Z87.1. Every day
glasses have only impact resistant lenses.
Do not expose power tools to rain or wet conditions.
Water entering the power tools will increase the risk of
electric shock.
Stay alert, watch what you are doing and use common
sense when operating a power tool/machine. Do not use
a power tool/machine while you are tired or under the
inuence of drugs, alcohol or medication. A moment of
inattention while operating power tool/machine may re-
sult in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure the switch is in the

Summary

Safety and Usage Guidelines

Intended Use

Operates the power tool/machine only for its intended purpose and within specified parameters.

General Precautions

Do not allow children to play with the tool; contact customer services if damaged or not functioning.

Personal Injury Risks

Avoid body contact with earthed surfaces; prevent unintentional starting; do not use in explosive atmospheres.

General Power Tool Operation and Care

Power Tool Usage

Use correct tool, keep sharp, check for damage, disconnect power before adjustments.

Cleaning and Maintenance

Never soak electrical components; unplug charger before cleaning; clean with cloth and compressed air.

Battery Warnings and Handling

Battery Warnings

Do not dismantle batteries; keep out of reach of children; recharge only with specified charger.

Battery Charger and Technical Information

Battery Charger Safety

Use charger only for its intended purpose; do not use extension cords; keep away from heat and water.

Technical Specifications

Lists battery rating, charger input and output specifications.

Product Compliance and Declarations

Declaration of Conformity

States compliance with essential directives and standards for SKU 3500228, 40V Hedge Trimmer.

Battery Management

Battery Status Indicators

Explains LED indicators for charging status, ready to charge, fully charged, and faults.

Battery Level Indicators

Shows how to check the remaining battery charge using indicator lights.

Product Operation

Using the Triggers

Illustrates how to use the front and rear handle triggers for operation.

Handle Rotation

Details how to rotate the handle by pressing a button for different angles.

Disposal and Support

Disposal Information

Please recycle where facilities exist; check with your local authority for recycling advice.

Customer Service

Contact support@domu.co.uk for product assistance and support.

Warranty and Copyright

Warranty Registration

Register product at www.vonhaus.com/warranty; retain proof of purchase.

Copyright and Company Info

Manual content is copyrighted; VonHaus is a registered trademark of DOMU Brands Ltd.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. General Safety Precautions for Use
5. Battery and Charger Usage
6. Maintenance Features

This document outlines the operation, safety, and maintenance of the VonHaus 3500228 40V Hedge Trimmer.

Function Description

The VonHaus 3500228 is a 40V hedge trimmer designed for domestic use. Its primary function is to trim hedges and shrubs using dual-action cutting blades. The device is powered by a 40V Lithium-ion battery, providing cordless operation. It features a handle rotate button for adjusting the cutting angle and a safety guard for user protection. The trimmer is intended for outdoor use in environments free from flammable liquids, gases, or dust.

Important Technical Specifications

• Battery Rating: 40V MAX, 4000mAh
• Charger Input: 220V-240V, 50/60Hz, 100W
• Charger Output: 42V, 2.0Ah
• Charging Time: Approximately 60 minutes for a full charge.

Usage Features

The hedge trimmer is designed for ease of use with several features aimed at enhancing user experience and safety:

• Dual Action Cutting Blades: These blades are designed for efficient and clean cutting of hedges.
• Front and Rear Handle Triggers: The device requires both triggers to be pressed simultaneously to operate, ensuring two-handed control and preventing accidental starting.
• Handle Rotate Button: This button allows the user to rotate the handle, enabling comfortable cutting at various angles (e.g., 90-degree rotation for vertical trimming).
• Safety Guard: A physical barrier between the user's hands and the cutting blades to prevent injury.
• Battery Level Indicator Lights: Located on the battery pack, these lights (100%, 75%, 25%, 0%) provide a visual indication of the remaining battery charge. A dedicated button activates these lights.
• Battery Release Button: For easy removal and insertion of the 40V battery pack.
• Blade Storage Cover: A protective cover for the blades when the trimmer is not in use, enhancing safety during storage and transport.

General Safety Precautions for Use:

• Always wear eye protection, a dust mask, and protective gloves.
• Keep children and bystanders away from the work area.
• Do not overreach; maintain proper footing and balance.
• Dress appropriately; avoid loose clothing or jewelry that could get caught in moving parts.
• Ensure the switch is in the "off" position before connecting or disconnecting the battery.
• Do not operate the tool if you are tired or under the influence of drugs, alcohol, or medication.
• Avoid body contact with earthed or grounded surfaces to reduce the risk of electric shock.
• Do not expose the power tool to rain or wet conditions.
• Do not immerse the device in water.
• Use the tool only for its intended purpose.

Battery and Charger Usage:

• The battery pack is not fully charged out of the box and must be charged before first use.
• Recharge only with the specified charger.
• The charger indicates "Ready to charge" (green flickering), "Charging" (solid red), "Fully Charged" (solid green), and "Battery/Charger is faulty" (solid green and red).
• The most suitable charging temperatures are between 20°C/68°F and 25°C/77°F.
• Do not charge the battery below or above recommended temperatures.
• Do not allow water or any other liquid to come into contact with the charger or battery.
• Do not dismantle or open secondary cells or batteries.
• Keep batteries out of reach of children.
• Do not store cells or batteries haphazardly where they could short-circuit.
• Remove the battery from the appliance when not in use.
• Do not leave a battery on prolonged charge when not in use.
• If a cell leaks, avoid contact with skin and eyes; seek medical advice if contact occurs.
• Dispose of cells and batteries of different electrochemical systems separately.

Maintenance Features

Proper maintenance is crucial for the longevity and safe operation of the hedge trimmer:

• Work Area Safety: Keep the work area clean and well lit.
• Tool Care:
  • Regularly check external nuts and fixings for looseness.
  • Maintain cutting tools sharp and clean. Properly maintained cutting tools are less likely to bind and are easier to control.
  • Check for misalignment or binding of moving parts, breakage, or any other condition that may affect the tool's operation. If damaged, have it repaired by a qualified person.
  • Keep ventilation slots and the motor housing free of dirt and dust.
  • Clean the tool by rubbing it with a clean cloth and blowing it clean with low-pressure compressed air.
  • Lubricate the blades before storing for a long period.
• Storage:
  • Store idle power tools out of reach of children in a dry, locked unit.
  • Ensure the power cord is located so it won't be stepped on, tripped over, or damaged.
  • Always store the power tool/machine in a dry place.
• Cleaning:
  • Never soak or immerse electrical components or components with a plug attached.
  • Disconnect the plug from the power source and/or battery pack before making any adjustments, changing accessories, or storing.
  • Ensure the motor has fully stopped before cleaning, clearing blockages, checking, or carrying out maintenance.
• Charger Maintenance:
  • Do not attempt to disassemble the charger; take it to an electrician or tool repairer if service is required.
  • Pull by the plug, not the cord, when disconnecting the charger.

VonHaus 3500228 Specifications

General

Brand	VonHaus
Model	3500228
Category	Trimmer
Language	English