Why do my Vonyx AP800A have constant noise, buzzing, or humming?
Constant noise, buzzing, or humming in your Vonyx Speakers can be due to faulty electronics. You should check and correct the system grounding as required. Also, perform a chain check for noisy sources or electronic components and inspect the wiring for proper shielding.
General| Power Output | 800W |
|---|---|
| Speaker Type | Active |
| Woofer Size | 8 inch |
| Tweeter Size | 1 inch |
| Impedance | 8 Ohm |
| Connectivity | RCA, XLR |
| Power Supply | 220-240V AC |
| Outputs | XLR |
Jack 1/4" input connector for microphone.
RCA input connectors for audio sources like mixer or CD player.
Volume control for the microphone input.
Volume control for the line input.
Adjusts bass and treble frequencies.
LED indicator for power status.
Solutions for when the speaker produces no sound.
Fixes for audio that cuts in and out.
Resolving unwanted electrical interference or noise.
Guidance for addressing weak low-frequency sound.
To Next Page
