Need help?Do you have a question about the Vonyx STM2290 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| USB | Yes |
| MIDI | No |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-noise ratio | >80dB |
| Type | Mixer |
| Inputs | 2x Phono |
| Outputs | Master, Record |
| Input level: Line | 150mV |
| Headphone impedance | 32 Ohms |
| Input level: Mic | 1.5mV |
Avoid water, wet hands, damaged leads, and opening the housing to prevent shock.
Do not place near heat, on vibrating surfaces, block ventilation, or use continuously.
Handle with care, clean with dry cloth, avoid unauthorized repairs.
Keep away from children, do not force controls, maintain distance from electronics.
Operate within temperature limits, charge battery periodically, dispose properly.
Adjusts the volume level of the microphone input.
VU-meter with LEDs indicating the strength of the output signal.
Adjusts audio frequencies with a 5-band equalizer.
Controls the volume for headphone monitoring.
Selects between stereo and mono output modes.
Controls the overall master output volume of the unit.
Controls for adding and adjusting eight built-in sound effects.
Adjusts the playback speed of the selected sound effect.
Controls the volume level of the sound effects.
Selects channels for crossfading and performs smooth transitions.
Connects the AC adapter for power supply.
6.35mm jack for connecting headphones for monitoring.
RCA connectors for linking to an amplifier.
RCA inputs for connecting line-level audio sources.
Switchable input for phono or line level signals.
Connector for microphone input.
Insert USB drive to play MP3 files, navigate tracks, and control playback.
Buttons for playback, pause, track selection, and volume adjustment.
Button to cycle through and select different input sources.
Activate BT on device, select 'VONYX' on mixer for wireless audio connection.
Specifies the audio frequency range and total harmonic distortion.
Details microphone, phono, line input levels and master output level.
Describes equalizer range and required power supply specifications.
Provides the physical size and weight of the mixer unit.
Lists conformity to European Community Directives (LVD, EMC, RoHS).
To Next Page
