VooPoo DRAG - Page 4

4. Safety Protection Function:
A. Battery Reverse Protection
B. Switch Timeout Protection
C. Over-temperature Protection
D. Output Over-current Protection
E. Overcharge Protection
F. Over discharge Protection
G. Short-circuit Protection
H. Support Balance Charge with difference brand
battery
5. Instruction:
A. Power on/off:
Press the fire button 5 times continuously.
B. Mode Switch Instruction:
Press fire button three times quickly to change
between the four interfaces:
Constant power —Y temperature control
SS/Nl/Ti.
Constant Voltage —Y temperature control
SS/Nl/Ti.
C. Temperature Adjustment:
When temperature was set to 1000C, keep on
pressing the down button, temperature will
turn to 6000F.
When temperature was set to 2000F, keep on
pressing the down button, temperature will
turn to 3150C.
Adjust the step: 1
Quickly press fire button 4 times can get into
wattage adjustment interface. Then you will
see the letter "W" is flashing. The adjustable
wattage is 5W to 80W.