EasyManua.ls Logo

Vornado 733DC User Manual

Vornado 733DC
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Vornado 733DC and is the answer not in the manual?

Vornado 733DC Specifications

General IconGeneral
BrandVornado
Model733DC
CategoryFan
LanguageEnglish

Summary

Important Safety Instructions

Risk to Children and Impaired Persons

Supervision is required for children 12 and younger and those with reduced capabilities during operation.

Installation Warning: Fire, Shock, Injury

Place product away from fabrics, heat sources, and water. Do not run cord under carpeting.

Safe Use Warning: Fire, Shock, Injury

Do not operate with solid state speed devices. Do not operate with damaged cord or plug.

External Power Supply and Cord Safety

Use only the detachable external power supply and cord. Check voltage compatibility.

Servicing Warning: Fire, Shock, Injury

Clean product regularly as instructed. Do not open appliance housing while plugged in.

Getting Started

Variable Speed Control

Rotate knob to the right to turn on and increase speed, to the left to lower speed and turn off.

Power Supply Connection

Insert DC power cord into port, connect AC power cord to supply, plug into outlet.

Installing Protective Feet

Use guide marks on base bottom for feet placement. Place pads over edge bends and curved ends.

Cleaning

General Cleaning Instructions

Unplug product before cleaning. Do not use chemicals. Dust or wipe circulator with damp cloth or vacuum.

Grille & Blade Removal

Grille Removal and Cleaning

Release front grille clips, wash grille with mild dishwashing soap, and reattach firmly.

Blade Removal and Cleaning

Pull blade straight from shaft, wash with mild dishwashing soap, reattach by aligning flat sides.

Troubleshooting

Unit Fails to Power On

Check plug connections, ensure speed is selected, or contact consumer service if damaged.

Airflow is Weak or Slow

Adjust to a higher speed setting or remove any obstructions blocking airflow.

GFCI Has Tripped

Change to a non-GFCI outlet or contact an electrician if GFCI outlet is weak or defective.

Related product manuals