Need help?Do you have a question about the Vornado VH200 and is the answer not in the manual?
General| Model | VH200 |
|---|---|
| Power Source | Electric |
| Voltage | 120V |
| Fan Speeds | 2 |
| Safety Features | Overheat Protection |
| Thermostat | Adjustable |
Defines the product's purpose for indoor living spaces only, excluding commercial uses.
Covers basic precautions for electrical appliances to reduce fire, shock, and injury risks.
Advises on safe handling to avoid risks to people and property, including modifications and placement.
Do not use outdoors, on wet surfaces, or immerse in water to prevent electrical shock.
Details risks from damaged cords, strain, foreign objects, and proper use of polarized plugs.
Avoid shared circuits with high-power devices and specific outlet types like GFCI.
Do not use extension cords, remote tabs, or timers with the heater.
Avoid touching hot surfaces and keep combustibles away to prevent burns.
Do not cover the heater or block air intakes/exhaust to prevent overheating and fire.
Supervise children and ensure safe use by individuals with reduced capabilities.
The exterior remains safe to touch, even on high heat settings.
Cuts power to the heater if airflow is blocked, preventing overheating.
Designed to resist curious fingers, enhancing safety.
Cuts power if the heater tips more than 10 degrees, preventing accidents.
Adjusts the temperature setting to maintain desired comfort levels.
A red light illuminates to indicate the heater is currently operating.
Allows selection between High (1500W), Medium (1125W), or Low (750W) heat settings.
Turns the heater On (I) or Off (0).
Use the integrated handle on the back for safe lifting and carrying.
Position the heater where airflow is not obstructed for efficient operation.
Plug the power cord into a standard grounded wall outlet.
Select mode, set thermostat high, then adjust counterclockwise until heat cycles off.
Always unplug the heater before performing any cleaning.
Use a vacuum brush attachment to remove dust from the front grill and air inlets.
Wipe down the entire heater exterior with a soft, clean cloth.
Unplug, bundle cord, cover or use original carton, and store in a cool, dry location.
Dispose of all packaging materials in an environmentally responsible manner.
Manually reset the heater by turning it off, unplugging, waiting, and plugging back in.
Contact Vornado Consumer Services if the safety shut-off repeatedly activates or won't reset.
Check plug, circuit breaker, fuse, overheating, or tip-over switch. Contact service if damaged.
Ensure unit is set to High Heat, thermostat is high, and room is sealed.
Check for stuck tip-over switch plunger and ensure proper power connection and heat setting.
Covers defects in material or workmanship for five years from purchase date.
Contact Vornado for a Return Authorization (RA) form and shipping instructions.
Excludes damage from abuse, modification, improper maintenance, or unauthorized repair.
To Next Page