Vornado VH202 User Manual (English)

Questions and Answers:

J
Jonathan LittleJul 27, 2025
What to do if my Vornado Electric Heater fails to power on?
- R
  Ricky WelchJul 27, 2025
  If your Vornado Electric Heater fails to power on, there are several potential causes. First, check your household circuit breaker or ground fault interrupter, as it may have tripped, or a fuse may have blown. Reset the breaker/interrupter or replace the fuse. Another possibility is that the unit has overheated, triggering the Automatic Safety Shut-Off. See RESETTING YOUR VORNADO HEATER. If neither of these solutions works, cease using the heater, unplug it, and contact Consumer Service for assistance.
A
Alexandra JohnsonAug 5, 2025
How to increase heat on my Vornado VH202 Electric Heater?
- J
  John SalazarAug 5, 2025
  To increase the heat output of your Vornado Electric Heater, ensure that the unit is set to High Heat. Additionally, close all doors and windows to trap heat within the room. Allow the unit several minutes to fully circulate the heat throughout the room.
K
Katherine EvansAug 15, 2025
Why is my Vornado VH202 Electric Heater power on but there is no heat?
- D
  Danny HendersonAug 16, 2025
  If your Vornado Electric Heater powers on but produces no heat, power off and unplug the unit. Locate the black disk on the bottom of the unit and push it in 4-5 times to ensure it is not stuck. Then, set the unit down on a flat surface, making sure the power cord is not underneath it. Plug the unit back in, power it on, and turn it to the highest heat setting.

Vornado VH202 Specifications

General

Model	VH202
Type	Electric Heater
Voltage	120V
Thermostat	Adjustable
Color	Black
Wattage	1500 Watts
Safety Features	Tip-over protection, Overheat protection
Air Circulation	Vortex Air Circulation
Power Settings	2 Heat Settings (High/Low)