14
FOR INSTALLERS AND PROFESSIONALS
1. TRANSPORTATION
1.1. When storing or moving the heat pump, the heat pump should be at the upright position.
1.2. When moving the heat pump, do not lift the water unions since the titanium heat
exchanger inside the heat pump will be damaged.
2. INSTALLATION AND MAINTENANCE
The heat pump must be installed by a professional team. The users are not qualied to
install by themselves, otherwise the heat pump might be damaged and risky for users’ safety.
2.1. Notice before installation
2.1.1. The inlet and outlet water unions can’t bear the weight of soft pipes. The heat pump must
be connected with hard pipes!
2.1.2. In order to guarantee the heating efciency, the water pipe length should be ≤10m
between the pool and the heat pump.
To Next Page
Loading...