26
FOR INSTALLERS AND PROFESSIONALS
5.4. Three methods of device binding
Please connect your phone to the Wi-Fi network rst.
5.4.1. Auto Discovery (Bluetooth)
a) Please make sure the Bluetooth function is enabled on your phone.
b) Press for 3 seconds after the screen unlock, will be ashing rapidly to enter Wi-Fi
binding status.
c) Click "Add Device", wait for the app to search for the device and then click “add”, then
follow the instructions below to nish the device binding.
Note:
1. It will take some time to scan, please be patient.
2. Only Wi-Fi modules with Bluetooth functions can use this method.
To Next Page
Loading...