28
FOR INSTALLERS AND PROFESSIONALS
5.4.3. AP Mode
Activate Wi-Fi module
a) Press for 10 seconds after the screen unlock, will be ashing slowly to enter Wi-Fi
binding status.
b) Click "Add device", and follow the instructions below to nish binding. display on the
screen once the Wi-Fi connection success.
Note: If it doesn't jump automatically, click "Conrm hotspot connection, next".
5.4.4. If connect fails, please make sure your network name and password are correct. And your
router, mobile phone and device are as close as possible.
5.4.5. Wi-Fi rebinding (When Wi-Fi password changes or network conguration changes)
Press for 10 seconds, will be ashing slowly for 60 seconds. Then will be off.
The original binding will be removed. Follow steps above for rebinding.
Remarks: Please make sure the router is congured at 2.4 GHz.
To Next Page
Loading...