2. Loop the strap over the
attachment point and insert
into the strap buckle.
3. Push the strap through the
buckle.
4. Secure the excess strap by
putting it into the strap loop.
5. Continue with the left side of
the strap in the same manner as
the right. Your binocular strap is
now secured, though you may
need to adjust the strap for the
best fit.
Note: attach the rainguard (the
one-piece eyepiece guard) to the
strap by pushing the strap through
the left slot of the rainguard before
putting the strap through that side
of your binoculars.
5
To Next Page
Loading...
