- 5 -
- 4 -
spotting scopes
1. Insert the eyepiece into the body
of the Viper spotting scope.
how To USe The Viper SpoTTing Scope
Before attaching the eyepiece, remove any covers that would interfere with attaching the
eyepiece to the spotting scope body. Keep exterior lens covers handy to protect exposed
lenses whenever you’re not viewing through the Viper spotting scope.
Attach the eyepiece
Picatinny Rail
Adjust the eyecup
The adjustable eyecup twists up and down so that you can observe the full field of view
even if you wear eyeglasses. Twist the eyecup down when viewing with eyeglasses or
sunglasses and twist up when viewing without glasses.
Align the scope with subject
The built-in Picatinny rail can be used to
easily attach red dot-type sights.
2. Turn and tighten the retaining
ring to securely attach or remove the
eyepiece.
Adjustable Eyecup
To Next Page
Loading...
Need help?
General
