EasyManuals Logo
Home>Vortice>Controller>C 2.5

Vortice C 2.5 User Manual

Vortice C 2.5
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
Do not use this appliance for purposes other than
those described in this booklet.
After removing the appliance from its packaging,
ensure that it is complete and undamaged. If in
doubt contact a professionally qualified electrician
or Vortice*. Do not leave packaging within the
reach of children or infirm persons.
Certain basic rules must be observed when using
any electrical appliance: a) Never touch electrical
appliances with wet or damp hands; b) Never touch
electrical appliances while barefoot; c) Never allow
children or infirm persons to operate appliances
unattended.
Store the appliance out of the reach of children
and infirm persons after disconnecting it from the
power supply.
Do not operate the appliance in the presence of
inflammable substances or vapours (alcohol,
insecticides, petrol, etc.).
Do not make modifications of any kind to this
appliance.
Do not expose this appliance to the weather (rain,
sun, etc.).
Regularly inspect the appliance for visible defects. If
any faults are found, do not operate the appliance;
contact Vortice* immediately.
If the appliance malfunctions or develops a fault,
contact Vortice* immediately. Ensure that only
genuine original Vortice spares are used for any
repairs.
Should the appliance be dropped or suff er a heavy
blow, have it checked immediately by Vortice*.
The appliance must be installed and the fuse
changed if necessary by a professionally qualified
electrician only.
Ensure that the electrical system to which the
appliance is connected complies with applicable
standards.
The appliance must be connected to an ear thed
power socket.
Check that the electrical power supply/socket
provides the maximum electrical power required by
the appliance. If this is not the case, arrange for a
qualified electrician to make the necessary
modifications.
Use a multi-polar switch with minimum contact gaps
of 3 mm to install the appliance .
Switch off the appliance at the main s witch: a) if the
appliance does not function correctly; b) before
cleaning the outside of the appliance, c) if the
appliance is not to be used f or any length of time.
Maximum adjustable load 2.5 A.
Minimum adjustable load 1A
Products are fitted with 5X20 type T3,15A H 250V
fuses.
This symbol indicates that the operation
must be carried out by a suitably
qualified person.
Warning: this symbol indicates precautions that must be taken to avoid injury
!
DESCRIPTION AND OPERATION ENGLISH
WARNING - CAUTION
Electronic speed regulator for Vortice products.
Not suitable for products with timers, automatic
switches or pull cords.
Convertible for flush mounting with Kit SCB
(code 22481).
Caution:
this symbol indicates precautions that must be taken to avoid damaging the appliance.
!
*(or an authorised Service Centre if you are outside the UK-Ireland terr itory)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vortice C 2.5 and is the answer not in the manual?

Vortice C 2.5 Specifications

General IconGeneral
BrandVortice
ModelC 2.5
CategoryController
LanguageEnglish

Related product manuals