EasyManua.ls Logo

Vortice VORT PROMETEO HR 400 User Manual

Vortice VORT PROMETEO HR 400
124 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
VORT PROMETEO
HR 400
Libretto istruzioni
Instruction booklet
Notice d’emploi et d’entretien
Betriebsanleitung
Instructieboekje
Manual de instrucţiuni
vod k poití
VORTICE LIMITED
Beeches House - Eastern Avenue
Burton on Trent
DE13 0BB
Tel. (+44) 1283-492949
Fax (+44) 1283-544121
UNITED KINGDOM
VORTICE FRANCE
72 Rue Baratte-Cholet
94106 Saint Maur Cedex
Tel. (+33) 1-55.12.50.00
Fax (+33) 1-55.12.50.01
FRANCE
VORTICE ELETTROSOCIALI S.p.A.
Strada Cerca, 2 - frazione di Zoate
20067 TRIBIANO (MI)
Tel. (+39) 02-90.69.91
Fax (+39) 02-90.64.625
ITALIA
COD. 5.371.084.606
14/07/2009

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Vortice VORT PROMETEO HR 400 and is the answer not in the manual?

Vortice VORT PROMETEO HR 400 Specifications

General IconGeneral
BrandVortice
ModelVORT PROMETEO HR 400
CategoryHeating System
LanguageEnglish

Summary

Description and Operation

Guarantee and Responsibility

Attention

Caution

Installation

Prerequisites

Lists the essential conditions required before proceeding with the appliance installation.

Assembly

Vertical mounting on brackets

Step-by-step instructions for mounting the unit vertically on walls using provided brackets.

Horizontal assembly on supports

Position the appliance on the location surface

Duct connections

Stale air flow towards the outside (extract to external)

Fresh air intake from the outside (supply from external)

Stale air flow extractor from the home (extract from internal)

Clear air inlet into the home (supply to internal)

Connection of the condensation draining tube

Initial Setup and Coupling

Function

Filters

Sensors

Remote control provided

Instruction for use

ON/OFF button

Explains how to power the appliance on and off using the remote control's dedicated button.

TIMER button

MODE button

SUMMER (fig.27c)

Disabling certain commands (by the Installer)

Prevention of changes to Vmin and Vmax speed

Warning/error signals

Fuse

Reset

Maintenance/Cleaning

Filters

Instructions for filter cleaning, replacement, and monitoring clogging status.

Clean the filters using a vacuum cleaner

Reinstall the filters

Heat exchanger

Extract the exchanger

Reinstall the exchanger

Replacement of the remote control batteries

Related product manuals