Vortice VORT HR 350 AVEL - User Manual

In
stallatio
n
F
or the H
R
U
ins
tallation pleas
e refer to the ins
truc
tion m
anual ins
ide the
pac
k
aging.
If c
onnec
tion of the preheater and boos
t are needed, w
ires
c
an be found
ins
ide the s
lot (A) pic
n°2.
In order to ac
c
es
s
this
s
lot y
ou need to rem
ov
e the front c
ov
er of the
m
ac
hine, to rem
ov
e the c
ov
er pleas
e follow
the ins
truc
tion in pic
. 4,5,6.
Onc
e the c
ables
are c
onnec
ted and the front c
ov
er c
los
ed, the m
ac
hine c
an
be plugged in the elc
tric
al s
oc
k
et.
VORT HR 350 AVEL
Installation guide for
Australian market
Packaging
Inside the packaging you will find the HRU with the already connected
a
ustralian plug, as shown in pic. n°1.
A
N
L
PE
GNYE
BU
BN
PREH
PREH
BN
BU
N
N
L
GND
BOOST
MAINS
BOOST
VCC
A
B
GND
HMI
5.571.084.391 14-11-2019
Wiring diagram
1
3
2

Summary

Packaging

Installation Guide

Accessing Preheater and Boost Connections

Wires for preheater and boost are located in slot (A), accessible after removing the front cover.

Wiring Diagram

Removing Front Panel

Front Panel Removal Procedure

Carefully unplug the display connector before removing the front panel to avoid cable damage.

Re-mounting Front Panel

Front Panel Re-installation

Reconnect display cables and route them properly before securing the front panel with Torx screws.

Vortice VORT HR 350 AVEL Specifications