4. FUNCTIONS AND INDICATORS
4.1 VIEW METER
The pointer will swing to the right as the unit has made a detection.
4.2 DISC
You can rotate the control from low to high to discriminate between metals.
4.3 SENC
When you rotate the SENS from on to high, the sensitivity is gradually increased. In
general use, you can set the SENC to a higher position. But in mineralized area, or
area with electrical interference, it s better to lower the SENS.
4.4 MODE SWITCH
ALL Search for all kinds of metal objects without discrimination.
DISC The mode DISC can facilitate in your search and discriminate the target type.
4.5 TARGET
To pinpoint the target. Press this button to lower the sensitivity automatically and to
locate the target.
0
1
10
9
8
7
6
5
4
3
2
SENSITIVITY
POWER
LOWBATT
To Next Page
Loading...