Rough up the rudder angle with a file,
the AB glue will adhere more easily,
the Insert the rudder horn with the AB
glue applied onto the wing;
Prepare the individual parts for the
wing servos
Rudder x 2 pcs
Rudder angle x 4pcs
Tie rods x 2
Rocker x 2
Install the rudder into the wing, fix it with
screws, install the rocker arm Then adjust
the length of the tie rods, and install them
on top of the rudder horns and servos
respectively;
Examples of rudder angle, tie rods,
rocker arms, and rudder completion;
Wing servo mounting method
To Next Page
Loading...