Rudder Servo Installation
Rough up the rudder angle with a file, t
he AB glue will adhere more easily,
the Insert the rudder horn with the AB glue
applied onto the wing;
Examples of rudder angle, tie rods,
rocker arms, and rudder completion;
Install the rudder into the wing,
fix it with screws, install the rocker arm
Then adjust the length of the tie rods,
and install them on top of the rudder
horns and servos respectively;
Prepare the individual parts for the flat tail;
Rudder x 1 pc.
Rudder horns x 2 pcs
Tie rods x 1 pcs
Rocker arm x 1 pc
To Next Page
Loading...