Need help?Do you have a question about the Vox AC30CC2X and is the answer not in the manual?
General| Power | 30 Watts |
|---|---|
| Power Tubes | 4 x EL84 |
| Reverb | Spring Reverb |
| Rectifier | Solid State |
| Type | Tube Amplifier |
| Speakers | 2 x 12" Celestion Blue |
| Channels | 2 |
| Controls | Volume, Treble, Bass, Reverb, Tone Cut |
| Preamp Tubes | 3 x ECC83/12AX7 |
| EQ | Bass, Treble |
| Inputs | 2x 1/4" (Normal and Top Boost channels) |
| Outputs | 1 x 8 Ohm, 1 x 16 Ohm |
Mandatory safety guidelines for operation, including electrical, water, and usage warnings.
Explanation of the CE mark and its significance for European market compliance.
Overview of the AC30's legacy, design philosophy, and key features that define its sound.
Details on AC30CC1, AC30CC2, AC30CC2X, and AC30CCH models with different speaker setups.
Information on V212BN, V212BNX, and V412BN/BL cabinets compatible with the AC30 series.
Connecting guitars and using the input link switch to combine channels.
Adjusting Normal Volume, Top Boost Volume, Brilliance, Treble, and Bass for desired tone.
Understanding the Standard and Custom EQ switch for interactive or less interactive tone shaping.
Configuring Reverb (Tone, Dwell, Mix) and Tremolo (Speed, Depth) effects.
Using Master Volume and the Cut control for overall sound management and frequency response.
Correct sequence for turning the amplifier on and off to ensure proper operation and tube longevity.
Connecting external speakers and understanding impedance matching for combos and heads.
Guide for setting the O/P Select switch based on cabinet impedance (8 or 16 Ohms).
Fine-tuning amplifier bias (Warm/Hot) and smoothing capacitor values (Vintage/Modern).
Connecting external effects via the FX loop and using the footswitch for remote control.
Locating and replacing fuses (HT, Mains) and connecting the power cord.
Specifications for the AC30CC1: 30W, 1x12 Neo-dog speaker, dimensions, and weight.
Specifications for the AC30CC2: 30W, 2x12 Wharfdale speakers, dimensions, and weight.
Specifications for the AC30CC2X: 30W, 2x12 Celestion Alnico speakers, dimensions, and weight.
Specifications for the AC30CCH amplifier head: 30W, dimensions, and weight.
Details of the product warranty, coverage, exclusions, and international validity.
Contact points for after-sales support, service centers, and important warnings for non-Japanese users.
Guidance on using products purchased internationally, including safety and warranty implications.
To Next Page
