RULES ТО BE FOLLOWED IN MAINTENANCE REPAIR AND USAGE
• Never open and try to fix your vacuum cleaner when it is failed.
• Do not operate your vacuum cleaner when it is dropped to floor or striken to a rigid
object, contact your authorized service.
• Never replace a damaged cable or plug, contact your authorized service.
ASSEMBLY AND USAGE
• After removing the device from its package, remove the motor section from the body
by opening the locking latches (4) that fix the section in which the transparent body (1)
is located.
• Place the sponge filter (15) into motor section.
• Fix water filter pipe (12) into water filter bed (14) in the water tank.
• Fill the product with water up to water level indicator (19).
• Place the jetty unit (11) into its place. Маке sure that the jetty filter (20) is fixed.
• Fix the motor cavity (2) and transparent body (1 ) using locking latches (4).
• Assemble sweeping apparatus (10), plastic pipe (9), vacuum adjusted elbow (18),
vacuum pipe (18) and pipe head (7).
• You can use other cleaning apparatus too as to your cleaning purpose.
WARNING: Mount the parts as specified in manual. Otherwise lifespan of your product
will reduce.
WETUSAGE
• Маке sure that the sponge filter is fixed (15). If the water filter pipe (12) fixed to
transparent body (1), remove it.
• Place the pipe head (7) into the pipe cavity (6) located in front of the main body.
• Close the motor section (2) and transparent body (1 ) using side latches (4).
• Water accumulated on various surfaces can be vacuumed into the device using
vacuum pipe (8) and vacuum adjusted elbow (18) in order to open blocked washbasins.
• Waste water should not be held in the device after vacuuming process done.
WARNING: Don't remove the sponge filter (15) during neither wet usage nor dry usage.
FILTERS
Sponge Filter: Sponge filter should be fixed into its place during dry and wet vacuuming.
Otherwise dust and large particles shall penetrate to the motor turbine, if we are doing
water suction, all water shall enter the turbine. In that case your guarantee shall be
invalid. Маке regular maintenance on your long term designed sponge filter. Leave them
to dry since they shall wear out too fast.
Jetty Unite Sponge Filter: It prevents that the water pass from air cavities in the jetty unite
during the dry usage. It also prevents that the water in the body pass to jetty unite. These
filters should be completely dried before usage.
CLEANING & MAINTENANCE
• Turn the motor switch (3) off. Remove electrical plug.
• Маке liquids in the pipe flow into the body (1) by raising the end of vacuum pipe (8).
• Unfasten the locking latches connecting the motor section (2) and transparent body (1)
and remove the vacuum pipe (8) from the body (1).
• Empty the waste water in the body (1) to washbasin.
• Reconnect the body (1 ) and motor cavity (2) and refix the vacuum pipe (8).
To Next Page
Loading...