Need help?Do you have a question about the Vox Valvetronix VT120+ and is the answer not in the manual?
General| Power Output | 120W |
|---|---|
| Amp Models | 33 |
| Speaker (Alternative) | Not Applicable |
| Weight (Alternative) | Not Applicable |
| Dimensions (Alternative) | Not Applicable |
| Effects | Reverb |
| Inputs | 1 x Instrument |
| Outputs | 1 x Headphone |
| Footswitch Compatibility | VFS5 |
| Effects Loop | Yes |
| Tube | Yes |
| Preamp Tubes | 1 x 12AX7 |
| Amplifier Type (Detailed) | Hybrid modeling amplifier with tube preamp |
Procedure for booting the unit into specific test modes using front panel switches.
Automatic inspection of internal components and circuits.
Checks wiring between CPU and DSP by reading register data.
Verification of switches, knobs, and LEDs on the control surface.
Checks the functionality and status of all switches and LEDs.
Tests potentiometers (VRs) with click feedback for proper operation.
Checks analog-to-digital conversion for potentiometers without clicks.
Tests headphone jack status and audio signal loopback.
Initializes user programs and data stored in DATA FLASH.
Bypass mode to test direct signal path through INPUT and output.
To Next Page
