Need help?Do you have a question about the Voxx adas ADVBSD30 and is the answer not in the manual?
The BSD system aids in detecting vehicles in blind spots, extending rearward from exterior mirrors.
The BSD system activates in two steps: ignition ON and speed above 15m/h.
Notifies driver of vehicles from rear. LED illuminates solid, flashes with turn signal and buzzer.
Alerts when a vehicle is in the BSD area during an overtaking maneuver.
Alerts during reversing for vehicles approaching from the sides up to 25ft.
User-selectable volume control for the system's buzzer: OFF, Low, or High.
Adjusts BSD sensor sensitivity for Standard or Short Alert Areas.
System activates above 15mph or anytime ignition is ON, configurable by installer.
Lists conditions affecting BSD/RCTA operation, like blocked sensors or speed mismatches.
The BSD system aids in detecting vehicles in blind spots, extending rearward from exterior mirrors.
The BSD system activates in two steps: ignition ON and speed above 15m/h.
Notifies driver of vehicles from rear. LED illuminates solid, flashes with turn signal and buzzer.
Alerts when a vehicle is in the BSD area during an overtaking maneuver.
Alerts during reversing for vehicles approaching from the sides up to 25ft.
User-selectable volume control for the system's buzzer: OFF, Low, or High.
Adjusts BSD sensor sensitivity for Standard or Short Alert Areas.
System activates above 15mph or anytime ignition is ON, configurable by installer.
Lists conditions affecting BSD/RCTA operation, like blocked sensors or speed mismatches.
General| Brand | Voxx |
|---|---|
| Category | Automobile Accessories |
| Type | Blind Spot Detection System |
| Alert Type | Audible and Visual |
| Visual Alert | LED Indicator |
| Operating Voltage | 12V DC |
| Installation | Professional Installation Recommended |
| Compatibility | Universal |
| Power Source | Vehicle electrical system |
To Next Page
