User Manual
2
The load cells can be supplied with connector or cable connection (see also page 6 and 7).
4-pin connector Cable connection
KxxD with one 4-pin connector or cable
KxxD-D with one 8-pin connector or cable connection
KxxD-D with two 4-pin connectors or dual cable connections
KxxD-D with one 4-pin connector and single cable connection
These load cells are approved for use in an explosive hazardous area, provided that
suitable intrinsic safety barriers or insulators are used and no rubbing with electrostatic
materials occurs on outside potted cavities surfaces.
CE-marking according to ATEX and EMC Directives, see appendix 1.
Potted
cavities
Rotation reference
surface
To Next Page
Loading...