Need help?Do you have a question about the VPI Industries JMW 10 and is the answer not in the manual?
General| Brand | VPI Industries |
|---|---|
| Model | JMW 10 |
| Category | Turntable |
| Language | English |
General advice on handling the delicate tonearm, bearing point care, and warranty voiding conditions.
Instructions for mounting cartridges with different hole types and connecting the color-coded wires.
Positioning the counterweight on the rear shaft for balance and minimal inertia.
Connecting the Lemo plug, ensuring turntable level, and initial tracking force setting.
Adjusting the azimuth balance ring for the stylus to be perpendicular to the record surface.
Understanding skating force and adjusting anti-skating via wire twist.
Using the alignment jig to set cartridge overhang for optimal groove tracking.
Adjusting the arm tube to be parallel to the record surface and fine-tuning by listening.
Adding damping fluid to the well and adjusting its level based on cartridge damping.
Connecting the tonearm output cables and ensuring proper grounding to minimize hum.
To Next Page
