EasyManua.ls Logo

VQ Model Junkers JU-52 User Manual

VQ Model Junkers JU-52
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SPECIFICATIONS
Wingspan:.........................1630mm (63in.)
Length:................................1070mm (41in.)
Electric Motor:.....................See next pager
RTF Weight: 2.3Kg / 5.1lbs (Will vary with
Equipment Used).
Radio:....................6 Channel / 6 Servos
Function: Ailerons-Flaps-Elevator-Rudder
WARNING! This radio controlled model is NOT a toy. If modified or flown carelessly it could go out of controll and
cause serious human injury or property damage. Before flying your airplane, ensure the air field is spacious enough.
Always fly it outdoors in safe areas and seek professional advice if you are unexperienced.
ACHTUNG! Dieses ferngesteuerte Modell ist KEIN Spielzeug! Es ist für fortgeschrittene Modellflugpiloten bestimmt,
die ausreichende Erfahrung im Umgang mit derartigen Modellen besitzen. Bei unsachgemässer Verwendung kann
hoher Personen- und/oder Sachschaden entstehen. Fragen Sie in einem Modellbauverein in Ihrer Nähe um
professionelle Unterstätzung, wenn Sie Hilfe im Bau und Betrieb benötigen. Der Zusammenbau dieses Modells ist
durch die vielen Abbildungen selbsterklärend und ist für fortgeschrittene, erfahrene Modellbauer bestimmt.
Radio control model / Flugmodell
ALL BALSA, PLYWOOD CONSTRUCTION AND ALMOST READY TO FLY
Instruction manual / Montageanleitung
TECHNISCHE DATEN
Spannweite:...................................1630mm
Lange:............................................1070mm
Elektroantrieb.............(siehe nächste Seite)
Brushless Motor:.............PULSAR P-15 X3
Fluggewicht:.......................................2.3Kg
Fernsteuerung................6 Kanal / 6 Servos
Question and Answer IconNeed help?

Do you have a question about the VQ Model Junkers JU-52 and is the answer not in the manual?

VQ Model Junkers JU-52 Specifications

General IconGeneral
BrandVQ Model
ModelJunkers JU-52
CategoryToy
LanguageEnglish

Summary

General Safety Warnings

Optional Accessories and Required Tools

Step 1: Motor Mount Installation

Step 2: Engine and Cowl Assembly

Steps 3 & 4: Cowl Positioning and Control Surface Prep

Steps 5 & 6: Control Horns and Stabilizer Prep

Step 7: Horizontal Stabilizer Installation

Step 8: Elevator Hinging

Step 9: Vertical Fin Installation

Steps 10 & 11: Rudder Hinging and Second Engine Assembly

Step 12: Landing Gear Assembly

Steps 13 & 14: Wing and Strut Attachment

Steps 15 & 16: Landing Gear Adjustment and Fuselage Assembly

Steps 17 & 18: Final Assembly and Control Linkages

Steps 19 & 20: Decals and Balancing

Related product manuals