VQ Models CESSNA 188 AGWAGON User Manual

SEMI SCALE MODEL
60 Class
90 Class
2-cycle engine
4-cycle engine
CESSNA 188
AGWAGON
SPECIFICATIONS
Wingspan 1920mm
Length 1300mm
Electric Motor 1000 Watt (BOOST 90)
Glow Engine .60 2-T / .90 4-T
Radio 6 Channel / 8 Servos
WARNING! This radio controlled model is NOT a toy. If modified or flown carelessly it could go out of controll and
cause serious human injury or property damage. Before flying your airplane, ensure the air field is spacious enough.
Always fly it outdoors in safe areas and seek professional advice if you are unexperienced.
ACHTUNG! Dieses ferngesteuerte Modell ist KEIN Spielzeug! Es ist für fortgeschrittene Modellflugpiloten bestimmt,
die ausreichende Erfahrung im Umgang mit derartigen Modellen besitzen Bei unsachgemäßer Verwendung kann
hoher Personen- und/oder Sachschaden entstehen. Fragen Sie in einem Modellbauverein in Ihrer Nähe um
professionelle Unterstützung, wenn Sie Hilfe im Bau und Betrieb benötigen. Der Zusammenbau dieses Modells ist
durch die vielen Abbildungen selbsterklärend und ist für fortgeschrittene, erfahrene Modellbauer bestimmt.
TECHNISCHE DATEN
Spannweiter 1920mm
Lange 1300mm
Elektroantrieb 1000 Watt (BOOST 90)
Verbrennerantrieb 10cc 2-T / 15cc 4-T
Fernsteuerung 6 Kanal / 8 Servos
MONTAGEANLEITUNG
INSTRUCTION MANUAL
Or Electric equivalent

VQ Models CESSNA 188 AGWAGON Specifications

General

Brand	VQ Models
Model	CESSNA 188 AGWAGON
Category	Toy
Language	English

Summary

Required Components and Tools

Required for Operation

Components that must be purchased separately for operation.

Assembly Steps

1- Horizontal Stabilizer Installation

Instructions for fitting and securing the horizontal stabilizer.

2- Vertical Stabilizer Installation

Instructions for fitting and securing the vertical stabilizer.

3- Elevator Installation

Instructions for attaching the elevator to the horizontal stabilizer.

4- Tail Wheel Leg Installation

Instructions for installing the tail wheel leg assembly.

5- Rudder Installation

Instructions for attaching the rudder to the vertical stabilizer.

6- Main Landing Gear Installation

Instructions for mounting the main landing gear.

7- Wheel Installation

8- Engine Mount Installation

Instructions for securing the engine mount to the fuselage.

9- Engine/Motor Installation

Instructions for installing the engine or electric motor.

10- Servo Installation

11- Linkage Setup

12- Fuel Tank Installation

13- Cowling Installation

14- Battery Installation

15- Servo Installation (Flap)

17- Wing Installation (Part 1)

18- Wing Installation (Part 2)

21- Canopy Installation

22- Cockpit Installation

23- Wing Brace Installation

26- Control Surface & Balance

Adjusting control surface travel and checking the center of gravity (CG).