VQ Models Pilatus Porter PC-6 User Manual

Semi scale model
BUILDING INSTRUCTIONS / MONTAGEANLEITUNG
SPECIFICATIONS
Wingspan 107 in.
Length 78.7 in.
Flying weight 14.4 lbs
Gas Engine 26 ~ 30cc
Radio 6 Channel / 8 servos
Technische Daten
Spannweite 2.720mm
Länge 2.000mm
Fluggewicht 6.500g
Verbrennerantrieb 26 ~ 30cc
Fernsteuerung 6 Kanal / 8 Servos
WARNING! This radio controlled model is NOT a toy. If modified or flown carelessly it could go out of controll and
cause serious human injury or property damage. Before flying your airplane, ensure the air field is spacious enough.
Always fly it outdoors in safe areas and seek professional advice if you are unexperienced.
ACHTUNG! Dieses ferngesteuerte Modell ist KEIN Spielzeug! Es ist für fortgeschrittene Modellflugpiloten bestimmt,
die ausreichende Erfahrung im Umgang mit derartigen Modellen besitzen Bei unsachgemäßer Verwendung kann
hoher Personen- und/oder Sachschaden entstehen. Fragen Sie in einem Modellbauverein in Ihrer Nähe um
professionelle Unterstützung, wenn Sie Hilfe im Bau und Betrieb benötigen. Der Zusammenbau dieses Modells ist
durch die vielen Abbildungen selbsterklärend und ist für fortgeschrittene, erfahrene Modellbauer bestimmt.
26 ~ 30cc
Gas Engine
Pilatus
PC-6
Porter
RADIO CONTROL MODEL / RC FLUGMODELL
“Skydive Marche”
VQA057
AUSTRALIA ARMY
VQA0571

VQ Models Pilatus Porter PC-6 Specifications

General

Brand	VQ Models
Model	Pilatus Porter PC-6
Category	Toy
Language	English

Summary

Safety and Required Components

General Safety Warning

Critical safety notice regarding model operation and potential hazards.

Required Components for Operation

Lists necessary external components like radio, servos, glue, and tools.

Landing Gear and Tail Assembly

Landing Gear Installation

Step-by-step guide for attaching the main and tail landing gears.

Vertical Stabilizer Installation

Instructions for mounting the vertical stabilizer to the fuselage.

Tail Gear Assembly

Details the assembly of the tail gear mechanism and control linkages.

Horizontal Stabilizer Installation

Process for attaching the horizontal stabilizer and elevators.

Wing and Control System Installation

Servo Installation

Guides for fitting servos for control surfaces like elevator, rudder, and flaps.

Control Linkages Setup

Instructions for connecting control horns, push rods, and servos.

Wing Mounting

Detailed steps for securely attaching the wings to the fuselage.

Aileron and Flap Linkage Setup

Details the installation of aileron and flap servos and their push rods.

Power System and Decoration

Engine and Cowl Installation

Steps for mounting the engine and its cowling.

Fuel Tank and Battery Installation

Guides for installing the fuel tank and Li-Po battery stand.

Decor Application

Instructions for applying decorative elements and stickers.

Final Checks and Flight Preparation

Center of Gravity (CG) Balancing

Crucial step for ensuring stable flight by checking the balance point.

Door Installation

Instructions for securing the model's doors.