VR46 Kiddy - Battery Charging and Activation

08
The charging port is located on the left side of the footrest (see photo)
The device is usually delivered partially charged. However, we recommend
chargingitfor6to8hoursbeforeusingitforthersttime.
We also recommend charging it after each use and before storing it.
Do not allow the electrical scooter to fully discharge to avoid damaging the
battery.
6. Battery charging and activation
IMPORTANT
1. Make sure that the power switch, on the right side of the platform, is set to “0” before connecting the
charger. Connect the charger to the charging port, which is located on the left side of the footrest. Set the
switch on the right side of the footrest to “I”
2. Plug the charger into a wall power outlet. The light on the
charger housing should come on. A red LED light indicates
that the battery is charging whereas a green LED light
indicates that the battery is fully charged.