Air Purifier | 7
Operating Instructions
BEFORE FIRST USE
Placing the filters
The appliance comes with all filters fitted inside, but you have to remove the packaging of the
filters before you can use the appliance. Remove all filters, unpack them and place them back into
the appliance as described below.
Note: Make sure you insert the filters in the correct position.
1. Put the appliance upside down on a soft cloth to avoid scratching. To open the base cover,
you need to find an arrow point on the base cover corresponding the LOCK position. Turn the
base cover counterclockwise from LOCK to OPEN position, then the lock is released.
2. Remove the base cover and take out the filter.
3. Remove the packaging material from the filter.
4. Put the filter back into the appliance.
To Next Page