What to do if my Vremi VRM050698N doesn't cool the room?
If your Vremi Air Conditioner isn't cooling the room, several factors could be at play. Ensure that doors, windows, and curtains are closed, following the tips for correct use. Remove any heat sources like ovens or hairdryers from the room. Also, check that the air exhaust hose is correctly fitted into the housing at the back of the appliance.
Why my Vremi VRM050698N Air Conditioner does not turn on?
If your Vremi Air Conditioner doesn't turn on, it could be due to a few reasons. First, check if the power supply is on and ensure the appliance is firmly plugged into the mains. If it still doesn't turn on, the internal safety device might have tripped. In this case, wait 30 minutes. If the problem persists after waiting, then no answer can be provided.
Why does my Vremi VRM050698N only work for a short time?
If your Vremi Air Conditioner operates only briefly, the issue might stem from the air exhaust hose. Ensure it's correctly positioned, keeping it as short and free of curves as possible to prevent bottlenecks. Also, inspect and clear any obstructions that are hindering air discharge.
How to get rid of an unpleasant smell from my Vremi Air Conditioner?
If there's an unpleasant smell during operation of your Vremi Air Conditioner, it's likely due to a clogged air filter. Clean the filter as described in the instructions to resolve this issue.
Why Vremi VRM050698N does not operate for about three minutes after restarting it?
If your Vremi Air Conditioner doesn't operate for about three minutes after restarting, this is normal. The internal compressor safety device prevents the appliance from restarting immediately, and a three-minute delay is standard.
Guidelines for safe operation by users, including children, and proper supervision.
Ensures safe electrical connections, proper grounding, and cord handling to prevent shock or fire.
Proper placement, operation, and cleaning procedures to ensure safe and efficient use.
Guides on connecting the exhaust hose and window slider kit for proper hot air expulsion.
Steps to set and operate the appliance in cool mode for cooling and dehumidifying.
Steps to set and operate the appliance in heat mode for warming the room.
Understanding error messages and codes displayed by the appliance for troubleshooting.
Guide on how to remove, clean, and reattach the air filters for efficient operation.
Identifies common issues, their causes, and recommended solutions for the appliance.
General| Type | Portable Air Conditioner |
|---|---|
| Cooling Capacity | 10, 000 BTU |
| Noise Level | 52 dB |
| Power Supply | 115V/60Hz |
| Fan Speeds | 3 |
| Control Type | Electronic |
| Display | LED |
| Remote Control | Yes |
| Refrigerant | R410A |
| Room Size Coverage | Up to 450 sq. ft. |
| Modes | Cool, Fan, Dry |
To Next Page
