Wheel settings
VRS
®
DirectForce
®
Pro Formula Wheel
Analog Input Mode
Dual clutch – In this mode, both paddles operate one input axis. The master clutch
operates from 0-100%, while the second clutch is limited by the "clutch bite point"
slider. At a race start, drivers can release the master clutch rst, followed by the
second clutch once the car is up to speed
Independent clutches - In this mode, each clutch paddle operates a separate axis.
The "clutch bite point" slider is disregarded, and both operate from 0-100%. The
paddles can also be assigned as a throttle and / or brake input in this mode,
allowing for driving without pedals.
Master clutch
This dropdown allows the user to choose to have either the left or right clutch set
as the master clutch.
Page
28
To Next Page
Loading...