Wheel settings
VRS
®
DirectForce
®
Pro Formula Wheel
Software reset with enter bootloader
Holding both the red button to the inside of the right funky switch, and the red
button to the inside of the left funky switch, while reconnecting the USB cable, will
result in the steering wheel entering bootloader mode. . It should never be used
without rst contacting us at info@virtualracingschool.com for further help."
Clutch calibration on-wheel
Press and hold both funky switches for 3 seconds until the LED illuminates in a
white color. For each clockwise click of rotation of the left funky switch, the clutch
bite point will increase by 1%, and vice versa. For the right funky switch, the
increment is 0.1%. Press and hold both funky switches for a further 3 seconds to
return to normal function while retaining the new setting.
Page
35
To Next Page
Loading...