Brake Sensor Activated
26
Error codes
ERROR CODE
Error Code Fault Diagnostic Step Resolution
00
Normal Status
Normally ok; Turn off and on
the scooter to see if the error
persists
Normally ok
06
Battery
Undervoltage
Check LCD setting P03 and
P15; Give battery a full
charge to see if issue persists
P03 should be in accordance
to the voltage specified in the
user manual. P15 should be
the specified voltage - 6V
07
Motor Fault
Unplug and plug motor
connector ba
ck in to see if
issue persists
If problem is resolved, then
make sure connector is
pushed in all the way.
If issue persists; check motor
wire and connector pins to
see if there are any issues
Either replace the motor or
replace motor wire.
To Next Page
Loading...