VSETT MINI - Error Codes

ERROR CODES
Brake Sensor Activated
27
Error codes
Error Code Fault Diagnostic Step Resolution
08 Turnstile Fault
Check if back screw or
magnet has come loose in
the throttle/LCD
Tighten back screw or
replace magnet in the throttle
09 Controller Fault Replace controller Replace controller
10
Communication
Receiving Fault
Unplug and plug in LCD
connector and see if issue
persists; IF issue persists,
then wiggle the LCD wire in
different directions to see if
pr
oblem persists
Change of wiring hardness
from LCD to controller might
be needed if the issue
persists
11
Communication
Transmission
Fault
Unplug and plug in controller
connector and see if issue
persists; IF issue persists,
then wiggle the LCD wire in
different directions to see if
problem persists
Change of wiring hardness
from LCD to controller might
be needed if the issue
persists