VSSL A.3 User Manual

USING ALEXA WITH VSSL
1. CONNECT THE ECHO DOT
Via Cable:
If you your Echo Dot can be installed in close proximity to your VSSL then
it is best to connect the Echo Dot to the VSSL via an analog audio cable.
For example: you have an Echo Dot on a counter top and the VSSL stored
in a cubord below.
You’ll need to purchase a 3.5mm to RCA cable. Like the one shown below:
You can use Alexa with VSSL, by connecting an Ec h o D o t to an input on the
VSSL. As an input all of the control and volume can be controlled by Alexa. In the
VSSL app, you can select the Echo Dot as a source on any room.
In this guide we will recomend how to connect an Echo Dot and configure your
VSSL to work with it.
BACKGROUND
Connect the 3.5mm end of the cable to the Echo Dot and the RCA end
of the cable to an input on the VSSL:
A.3 Inputs: Bus In, Zone In 1-3
A.6 Inputs: Bus In 1-2, Zone In 1-6

VSSL A.3 Specifications

General

Brand	VSSL
Model	A.3
Category	Media Converter
Language	English

Summary

Background Information

Connect Echo Dot to VSSL

Analog Connection via Cable

Connect Echo Dot to VSSL using a 3.5mm to RCA analog audio cable for direct audio input.

Bluetooth Connection via Receiver

Use a Bluetooth receiver to connect Echo Dot to VSSL wirelessly, offering a range of 50-70ft indoors.

Configure VSSL for Echo Dot

Name Analog Inputs

Assign custom names to analog inputs in the VSSL app for easy source identification.

Select Echo Dot Source in App

Choose the configured Echo Dot input as the audio source for any room within the VSSL app.