www.vtdrive.com
explosion-proof type soft starter, low-temperature type soft starter, or high-voltage
type soft starter.
3.2 The installation requirement
● The direction and distance of installation: In order to make sure that the soft
starter be in good draft and heat dissipation, please install the product in vertical
direction, and be sure the spare around the product is enough.
(See the following diagram 3.1 and 3.2)
● If the soft starter is installed in a box, please note that the draft is very good, as
well as the above notes.
(See the following diagram 3.3)
3.3 The Installation Dimensions
The External shape and installation dimensions of 5.5KW-55KW
External shape
dimensions(mm)
Installation
dimensions(mm)
Note: The rated power of motor in the above form is the maximum rated value.
generally, the values of matched motor should not be more than this value.
To Next Page
Loading...