VTech Baby 3-in-1 Zebra Scooter User Manual

6
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended
number of power supplies.
• Do not dispose of batteries in re.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
Help the environment by disposing of your product responsibly.
The wheelie bin symbols indicate the product and batteries must not
be disposed of in the domestic waste as they contain substances
which can be damaging to the environment and health. Please use
designated collection points or recycling facilities when disposing of
the item or batteries.
More information can be found on:
http://www.recycle-more.co.uk; www.recyclenow.com
ASSEMBLY INSTRUCTIONS
1. To install the front wheels onto the zebra
body, rst put one wheel on the end of
the axle, then thread the axle through the
zebra body. Attach the other wheel to the
end of the axle.
2. Attach the fastener to the end wheel,
aligning the pin on the fastener with the
hole in the axle. Push the pin down into
the hole. Insert the wheel cover into the
fastener, then tighten the two shorter
screws with a screwdriver.
Assembly Instructions
With the VTech
®
3-in-1 Zebra Scooter, safety comes rst. To
ensure your child’s safety, please only allow an adult to assemble
this product.

VTech Baby 3-in-1 Zebra Scooter Specifications

General

Brand	VTech Baby
Model	3-in-1 Zebra Scooter
Category	Scooter
Language	English