7
3. To attach the left and right handles to
the zebra’s head, insert them into the
corresponding holes on the sides of the
head. You will hear a loud ‘click’ sound.
This indicates that the handles are
securely xed into the head.
4. Attach the zebra’s head to the body by
inserting the head onto the body. You will
hear it ‘click’ into place. Please ensure
the head is attached securely to the
body. Once the head has been attached,
it cannot be removed again.
5. Turn the zebra over to tighten the two
longer screws with a screwdriver. These
are the screws that attach the neck to the
body.
6. Insert the big screw under the seat. You
will hear a loud ‘click’ sound.
Assembly Instructions
To Next Page
Loading...
Need help?
General