7
7
7
1. Attach the six Long Support Poles (A) to both ends of the three
Links (B). This will form three extended poles. Thread the three
extended poles through the three openings at the beginning, middle
and end of the Crawling Tunnel as indicated in the images to form
three archways.
B
A
A
2. Connect the three Support Stand Pieces with the eight Screws.
1
2
3
Tuck each pole end into the pocket at the end of each archway.
Use a hard surface to push the pole further into the opening to
make sure the pole end is covered by the pocket so the pole is not
exposed. The poles are intended to t snuggly to create a sturdy
crawling tunnel.
To Next Page
Loading...
Need help?
General
