VTech Baby Turtle's Busy Day Soft Book User Manual

4
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover on the back of the
book. Use a screwdriver to loosen the
screw and then open the battery cover.
3. Remove the old battery by pulling up on
one side of the battery.
4. Install 1 new AAA battery following the
diagram inside the battery box.
5. Replace the battery cover and tighten
the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.
IMPORTANT: BATTERY INFORMATION
• Insertbatterieswiththecorrectpolarity(+and-).
• Donotmixoldandnewbatteries.
• Donotmixalkaline,standard(carbon-zinc)orrechargeable
batteries.
• Onlybatteriesofthesameorequivalenttypeasrecommended
are to be used.
• Donotshort-circuitthesupplyterminals.
• Removebatteriesduringlongperiodsofnon-use.
• Removeexhaustedbatteriesfromthetoy.
• Disposeofbatteriessafely.Donotdisposeofbatteriesinfire.

VTech Baby Turtle's Busy Day Soft Book Specifications

General

Brand	VTech Baby
Model	Turtle's Busy Day Soft Book
Category	Toy
Language	English