41
-OR-
Lift up the handset and enter the telephone number.
Place the handset back onto the main base unit
within 30 seconds. The speakerphone will be turned
on automatically and call is made.
To end the call, press
.
Notes:
If there is more than one handset registered to the
base, the handset on the main base unit should be
left as a power supply of the base and you can use
the other handset(s) to make calls like normal.
The handset should always remain on the main
base unit for the entire length of the call.
•
•
To answer a call using Power Fail Back-Up mode
If there is only one handset registered to the base:
When the phone rings, keep the handset on the main
base unit and press
or to answer the call. The
speakerphone will be turned on automatically and
call is made.
To end the call, press
.
Notes:
If there is more than one handset registered to the
base, the handset on the main base unit should be
left as a power supply of the base and you can use
the other handset(s) to receive calls like normal.
The power supplying handset should always be placed
on the main base unit for the entire length of the call.
The range of the base unit is limited during Power Fail
Back-Up mode. Keep the handset close to the base unit.
•
•
•
1.
2.
3.
1.
2.
To Next Page
Loading...
Need help?
General
