VTech 3-in-1 Ride with Me Motorbike - Dashboard and Back Wheels Assembly; Locking Switch Operation

10
10
10
2. Insert the Interactive Dashboard into
the slot on the top of the vehicle body.
You will hear the pieces snap together
when connected properly.
3. To assemble the back wheels in the
tricycle position, insert each of the
wheels into the slots on the bottom
of the vehicle body so the tricycle
labels are visible. You will hear the
pieces snap together when connected
properly.
4. To assemble the back wheels in the
motorbike position, insert each of the
wheels into the slots on the bottom
of the vehicle body so the motorbike
labels are visible. You will hear the
pieces snap together when connected
properly.
5. To use the motorbike as a push-along
walker with the wheels in tricycle
position, slide the Locking Switch to
the locked position so the front wheel
does not turn left or right, providing
a more stable walker. When using
the motorbike as a ride-on toy, slide
the Locking Switch to the unlocked
position.