8
ASSEMBLY INSTRUCTIONS
With the 4-In-1 Ride-On Fawn, safety comes first. To ensure your
child’s safety, adult assembly is required.
1. Attach the set of Front Wheels to the
underside of the Scooter Base. Use
six of the Screws to secure.
2. Attach the two Rear Wheels to the
underside of the Scooter Base. Use
eight of the Screws to secure.
3. Insert the Handlebars into either
side of the Fawn Head. You will
hear the Handlebars click into place
when inserted correctly. Once the
Handlebars have been attached, they
cannot be removed.
To Next Page
Loading...
