VTech 527703 - Page 9

9
4. Push the Fawn Head onto the
Scooter Base. You will hear the Fawn
Head click into place when inserted
correctly. Turn the Scooter Base over
and use two of the Screws to secure.
5. Attach the Wagon Body to the Scooter
Base. You will hear the Wagon
Body click into place when inserted
correctly.
6. Insert the Walker Handle into the top
of the Scooter Base, then push and
turn the Green Lock clockwise to
secure the Walker Handle. Use the
Walker Handle to push or pull the
fawn.
WARNING:
Not to be used by children over 36 months. Insufcient
strength. Protective equipment should be worn. Not to be
used in trafc. 20kg Max. Regularly check for signs of wear or
tear on the snap in or locking devices. If damaged do not use
until repaired or replaced. Only to be used under the direct
supervision of a competent adult.