VTech Analog Contemporary Series User Manual

EN - 26
Make a second call
If you have an active call and intend to make a
new call.
Press Flash to put the active call on hold, and
use the keypad to enter the number. Press Call
soft key to place a call.
Switching between calls
If you have an active call and another call on
hold, you can switch between the two calls.
1. Press Flash to put the active call on hold,
and resume the held call.
2. To end both calls, press End or
on the cordless handset or place it in the
handset charger.
Speed dial
To dial a speed dial number:
1. Press SpdDial.
2. Press or to select a speed dial entry.
3. Press OK.
Alternatively, you can press a speed dial key
( or ), or press a speed dial soft key
(for example, RmServ).
Message waiting indicator
When a new voice message is received,
the handset displays " New msg" on the
screen.
Play messages
1. When the phone is idle, press .
The handset dials the voicemail access
number.
2. Follow the voice prompts to play your
messages.
Find handset
Use this feature to find all registered cordless
handsets.
To start paging:
Press / FIND HANDSET on the telephone base
when the phone is not in use. All idle cordless
handsets beep for 60 seconds.
To end paging:
• Press / FIND HANDSET again on the
telephone base.
-OR-
• Press on the cordless handset.

VTech Analog Contemporary Series Specifications

General

Brand	VTech
Model	Analog Contemporary Series
Category	Handsets
Language	English